Skip to content
Fitment · Yamaha

Wolverine / Wolverine R-Spec
wheels & tires.

Bolt pattern, studs and the 15-inch Packard wheel and tire sizes for the 2016–2018 Yamaha Wolverine / Wolverine R-Spec.

4x110Bolt pattern
M12x1.25Stud thread
2016–2018Model years covered

What fits

The numbers for your Wolverine / Wolverine R-Spec.

Bolt pattern4x110

If you got 110 mm between neighbouring studs on a Polaris, KRX or 2019+ YXZ, the pattern is 4x156 — measure across the diagonal.

Stud threadM12x1.25

Lug nuts must match the pitch. The wrong one starts on the stud, then binds.

CentringLug-centric

Conical seats centre the wheel on the studs.

Check it yourself

Measure before you order.

4x110 · 4 studs on a 110 mm circle
Measure across the diagonal.

Center of one stud to the center of the stud opposite: 110 mm. Neighbouring studs on a 4x156 hub sit about 110 mm apart, which is how 4x156 machines get ordered as 4x110.

Match the thread, not just the pattern.

M12x1.25 here. The wrong pitch starts on the stud and then binds.

Torque to the book.

Use the lug nut torque figure in your owner’s manual.

Taller tires cost acceleration.

Two inches over stock on a belt-driven car usually wants a clutch kit; sand paddles add rotating mass on top.

What Packard builds for it

3 forged styles in 4x110.

15x7 fronts and 15x11 rears, forged centers with beadlock or standard-lip barrels. The machine decides the pattern; you decide the rest.

All 4x110 wheels →Wheels filtered to your Wolverine / Wolverine R-Spec →

Tires and parts

Finish the set.

Questions

Wolverine / Wolverine R-Spec fitment questions.

What bolt pattern does the Yamaha Wolverine / Wolverine R-Spec use?

The 2016–2018 Yamaha Wolverine / Wolverine R-Spec uses a 4x110 bolt pattern. If you got 110 mm between neighbouring studs on a Polaris, KRX or 2019+ YXZ, the pattern is 4x156 — measure across the diagonal.

What lug nut thread does the Yamaha Wolverine / Wolverine R-Spec use?

M12x1.25 studs. Use lug nuts with that pitch. A nut with the wrong pitch starts on the stud and then binds.

Is the Yamaha Wolverine / Wolverine R-Spec hub-centric or lug-centric?

Lug-centric. Conical lug seats centre the wheel on the studs.

What size Packard wheels and tires fit the Yamaha Wolverine / Wolverine R-Spec?

Packard builds 15x7 fronts and 15x11 rears for it.

What other machines share wheels with the Yamaha Wolverine / Wolverine R-Spec?

The same 4x110 pattern is on the Yamaha YXZ 1000R, Yamaha Wolverine X2 / X4, Yamaha Viking / Viking VI, Yamaha Rhino 450 / 660 / 700, Honda Pioneer 700 / 700-4, CFMOTO ZFORCE 950, CFMOTO UFORCE 1000, CFMOTO ZFORCE 800 Trail / 800 EX. Check the stud thread before you swap lug nuts between them.