Skip to content
Fitment · Kymco

UXV 450i / 700i
wheels & tires.

Bolt pattern, studs and the 15-inch Packard wheel and tire sizes for the 2008–2024 Kymco UXV 450i / 700i.

4x110Bolt pattern
M10x1.25Stud thread
2008–2024Model years covered

What fits

The numbers for your UXV 450i / 700i.

Bolt pattern4x110

If you got 110 mm between neighbouring studs on a Polaris, KRX or 2019+ YXZ, the pattern is 4x156 — measure across the diagonal.

Stud threadM10x1.25

Lug nuts must match the pitch. The wrong one starts on the stud, then binds.

CentringLug-centric

Conical seats centre the wheel on the studs.

Check it yourself

Measure before you order.

4x110 · 4 studs on a 110 mm circle
Measure across the diagonal.

Center of one stud to the center of the stud opposite: 110 mm. Neighbouring studs on a 4x156 hub sit about 110 mm apart, which is how 4x156 machines get ordered as 4x110.

Match the thread, not just the pattern.

M10x1.25 here. The wrong pitch starts on the stud and then binds.

Torque to the book.

Use the lug nut torque figure in your owner’s manual.

Taller tires cost acceleration.

Two inches over stock on a belt-driven car usually wants a clutch kit; sand paddles add rotating mass on top.

What Packard builds for it

3 forged styles in 4x110.

15x7 fronts and 15x11 rears, forged centers with beadlock or standard-lip barrels. The machine decides the pattern; you decide the rest.

All 4x110 wheels →Wheels filtered to your UXV 450i / 700i →

Tires and parts

Finish the set.

Sand tires

Packard sand tires are built for 15-inch wheels. Steers up front, paddles in the rear.

All sand tires →

Questions

UXV 450i / 700i fitment questions.

What bolt pattern does the Kymco UXV 450i / 700i use?

The 2008–2024 Kymco UXV 450i / 700i uses a 4x110 bolt pattern. If you got 110 mm between neighbouring studs on a Polaris, KRX or 2019+ YXZ, the pattern is 4x156 — measure across the diagonal.

What lug nut thread does the Kymco UXV 450i / 700i use?

M10x1.25 studs. Use lug nuts with that pitch. A nut with the wrong pitch starts on the stud and then binds.

Is the Kymco UXV 450i / 700i hub-centric or lug-centric?

Lug-centric. Conical lug seats centre the wheel on the studs.

What size Packard wheels and tires fit the Kymco UXV 450i / 700i?

Packard builds 15x7 fronts and 15x11 rears for it.

What other machines share wheels with the Kymco UXV 450i / 700i?

The same 4x110 pattern is on the Yamaha YXZ 1000R, Yamaha Wolverine X2 / X4, Yamaha Wolverine / Wolverine R-Spec, Yamaha Viking / Viking VI, Yamaha Rhino 450 / 660 / 700, Honda Pioneer 700 / 700-4, CFMOTO ZFORCE 950, CFMOTO UFORCE 1000. Check the stud thread before you swap lug nuts between them.