Skip to content
Fitment · CFMOTO

ZFORCE 800 Trail / 800 EX
wheels & tires.

Bolt pattern, studs and the 15-inch Packard wheel and tire sizes for the 2014–2026 CFMOTO ZFORCE 800 Trail / 800 EX.

4x110Bolt pattern
Lug-centricCentring
2014–2026Model years covered

What fits

The numbers for your ZFORCE 800 Trail / 800 EX.

Bolt pattern4x110

If you got 110 mm between neighbouring studs on a Polaris, KRX or 2019+ YXZ, the pattern is 4x156 — measure across the diagonal.

CentringLug-centric

Conical seats centre the wheel on the studs.

Check it yourself

Measure before you order.

4x110 · 4 studs on a 110 mm circle
Measure across the diagonal.

Center of one stud to the center of the stud opposite: 110 mm. Neighbouring studs on a 4x156 hub sit about 110 mm apart, which is how 4x156 machines get ordered as 4x110.

Torque to the book.

Use the lug nut torque figure in your owner’s manual.

Taller tires cost acceleration.

Two inches over stock on a belt-driven car usually wants a clutch kit; sand paddles add rotating mass on top.

What Packard builds for it

3 forged styles in 4x110.

15x7 fronts and 15x11 rears, forged centers with beadlock or standard-lip barrels. The machine decides the pattern; you decide the rest.

All 4x110 wheels →Wheels filtered to your ZFORCE 800 Trail / 800 EX →

Tires and parts

Finish the set.

Questions

ZFORCE 800 Trail / 800 EX fitment questions.

What bolt pattern does the CFMOTO ZFORCE 800 Trail / 800 EX use?

The 2014–2026 CFMOTO ZFORCE 800 Trail / 800 EX uses a 4x110 bolt pattern. If you got 110 mm between neighbouring studs on a Polaris, KRX or 2019+ YXZ, the pattern is 4x156 — measure across the diagonal.

Is the CFMOTO ZFORCE 800 Trail / 800 EX hub-centric or lug-centric?

Lug-centric. Conical lug seats centre the wheel on the studs.

What size Packard wheels and tires fit the CFMOTO ZFORCE 800 Trail / 800 EX?

Packard builds 15x7 fronts and 15x11 rears for it.

What other machines share wheels with the CFMOTO ZFORCE 800 Trail / 800 EX?

The same 4x110 pattern is on the Yamaha YXZ 1000R, Yamaha Wolverine X2 / X4, Yamaha Wolverine / Wolverine R-Spec, Yamaha Viking / Viking VI, Yamaha Rhino 450 / 660 / 700, Honda Pioneer 700 / 700-4, CFMOTO ZFORCE 950, CFMOTO UFORCE 1000. Check the stud thread before you swap lug nuts between them.