Skip to content
Fitment · Segway

Fugleman UT10
wheels & tires.

Bolt pattern, studs and the 15-inch Packard wheel and tire sizes for the 2022–2026 Segway Fugleman UT10.

4x110Bolt pattern
M12x1.25Stud thread
2022–2026Model years covered

What fits

The numbers for your Fugleman UT10.

Bolt pattern4x110

If you got 110 mm between neighbouring studs on a Polaris, KRX or 2019+ YXZ, the pattern is 4x156 — measure across the diagonal.

Stud threadM12x1.25

Lug nuts must match the pitch. The wrong one starts on the stud, then binds.

CentringLug-centric

Conical seats centre the wheel on the studs.

Check it yourself

Measure before you order.

4x110 · 4 studs on a 110 mm circle
Measure across the diagonal.

Center of one stud to the center of the stud opposite: 110 mm. Neighbouring studs on a 4x156 hub sit about 110 mm apart, which is how 4x156 machines get ordered as 4x110.

Match the thread, not just the pattern.

M12x1.25 here. The wrong pitch starts on the stud and then binds.

Torque to the book.

Use the lug nut torque figure in your owner’s manual.

Taller tires cost acceleration.

Two inches over stock on a belt-driven car usually wants a clutch kit; sand paddles add rotating mass on top.

What Packard builds for it

3 forged styles in 4x110.

15x7 fronts and 15x11 rears, forged centers with beadlock or standard-lip barrels. The machine decides the pattern; you decide the rest.

ElementSee the Element →WishboneSee the Wishbone →V2 Super StarSee the V2 Super Star →

All 4x110 wheels →Wheels filtered to your Fugleman UT10 →

Tires and parts

Finish the set.

Sand tires

Packard sand tires are built for 15-inch wheels. Steers up front, paddles in the rear.

All sand tires →
Parts for the Fugleman UT10Everything in the catalog that fits this machine.Places to rideDune destinations by elevation.

Same wheels fit

Machines that share 4x110.

Same pattern, so the same Packard wheel. The stud thread can still differ, so check it on each page.

Yamaha YXZ 1000RYamaha Wolverine X2 / X4CFMOTO ZFORCE 950CFMOTO UFORCE 1000Segway Villain SX10All machines →

Questions

Fugleman UT10 fitment questions.

What bolt pattern does the Segway Fugleman UT10 use?

The 2022–2026 Segway Fugleman UT10 uses a 4x110 bolt pattern. If you got 110 mm between neighbouring studs on a Polaris, KRX or 2019+ YXZ, the pattern is 4x156 — measure across the diagonal.

What lug nut thread does the Segway Fugleman UT10 use?

M12x1.25 studs. Use lug nuts with that pitch. A nut with the wrong pitch starts on the stud and then binds.

Is the Segway Fugleman UT10 hub-centric or lug-centric?

Lug-centric. Conical lug seats centre the wheel on the studs.

What size Packard wheels and tires fit the Segway Fugleman UT10?

Packard builds 15x7 fronts and 15x11 rears for it.

What other machines share wheels with the Segway Fugleman UT10?

The same 4x110 pattern is on the Yamaha YXZ 1000R, Yamaha Wolverine X2 / X4, CFMOTO ZFORCE 950, CFMOTO UFORCE 1000, Segway Villain SX10. Check the stud thread before you swap lug nuts between them.