UFORCE 600 / 800
wheels & tires.
Bolt pattern, studs and the 15-inch Packard wheel and tire sizes for the 2013–2026 CFMOTO UFORCE 600 / 800.
What fits
The numbers for your UFORCE 600 / 800.
If you got 110 mm between neighbouring studs on a Polaris, KRX or 2019+ YXZ, the pattern is 4x156 — measure across the diagonal.
Conical seats centre the wheel on the studs.
Check it yourself
Measure before you order.
Center of one stud to the center of the stud opposite: 110 mm. Neighbouring studs on a 4x156 hub sit about 110 mm apart, which is how 4x156 machines get ordered as 4x110.
Use the lug nut torque figure in your owner’s manual.
Two inches over stock on a belt-driven car usually wants a clutch kit; sand paddles add rotating mass on top.
What Packard builds for it
3 forged styles in 4x110.
15x7 fronts and 15x11 rears, forged centers with beadlock or standard-lip barrels. The machine decides the pattern; you decide the rest.
All 4x110 wheels →Wheels filtered to your UFORCE 600 / 800 →
Tires and parts
Finish the set.
Sand tires
Packard sand tires are built for 15-inch wheels. Steers up front, paddles in the rear.
All sand tires →Same wheels fit
Machines that share 4x110.
Same pattern, so the same Packard wheel. The stud thread can still differ, so check it on each page.
Questions
UFORCE 600 / 800 fitment questions.
What bolt pattern does the CFMOTO UFORCE 600 / 800 use?
The 2013–2026 CFMOTO UFORCE 600 / 800 uses a 4x110 bolt pattern. If you got 110 mm between neighbouring studs on a Polaris, KRX or 2019+ YXZ, the pattern is 4x156 — measure across the diagonal.
Is the CFMOTO UFORCE 600 / 800 hub-centric or lug-centric?
Lug-centric. Conical lug seats centre the wheel on the studs.
What size Packard wheels and tires fit the CFMOTO UFORCE 600 / 800?
Packard builds 15x7 fronts and 15x11 rears for it.
What other machines share wheels with the CFMOTO UFORCE 600 / 800?
The same 4x110 pattern is on the Yamaha YXZ 1000R, Yamaha Wolverine X2 / X4, Yamaha Wolverine / Wolverine R-Spec, Yamaha Viking / Viking VI, Yamaha Rhino 450 / 660 / 700, Honda Pioneer 700 / 700-4, CFMOTO ZFORCE 950, CFMOTO UFORCE 1000. Check the stud thread before you swap lug nuts between them.





