Skip to content
Fitment · Kawasaki

Kawasaki Teryx / Teryx4
wheels & tires.

Bolt pattern, studs and the 15-inch sizes Packard builds for the 2014–2026 Kawasaki Teryx / Teryx4 — from the shop in Clearfield that machines the wheels.

Build a set for itWheels that fit
What fits
Bolt pattern4x136/137Can-Am and Honda call this 4x136 or 4x137 — same wheel. Check the stud thread: X3/Talon are M12x1.5, Defender/Commander/Sport/Trail are M10x1.25.
Stud threadM12x1.25Lug nuts must match the pitch — the wrong one starts on the stud, then binds.
CentringLug-centricConical seats centre the wheel on the studs.
What Packard builds for it

6 forged styles in 4x136/137.

15x7 fronts and 15x11 rears, forged centers with beadlock or standard-lip barrels, in every finish. Same bolt pattern, same lug-hole spacing — the machine decides the pattern, you decide the rest.

ElementApolloCycloneV2WishboneIcon
Open the wheel builder
Before you order
  • Measure across the diagonal. On a 4-lug hub, neighbouring studs on a 4x156 hub sit about 110 mm apart — that is how 4x156 machines get ordered as 4x110.
  • Match the stud thread, not just the pattern. M12x1.25 here; the wrong pitch starts and then binds.
  • Torque lug nuts to the figure in your owner's manual.
  • Taller tires cost acceleration. Two inches over stock on a belt-driven car usually wants a clutch kit; sand paddles add rotating mass on top.
Same wheels fit
Can-Am Maverick X3Can-Am Maverick Sport / TrailCan-Am CommanderCan-Am DefenderHonda Talon 1000Honda Pioneer 1000

Pick the style. Pick the finish.
See the price.

Build a set for itAll FF Forged wheels