Havoc / Stampede
wheels & tires.
Bolt pattern, studs and the 15-inch Packard wheel and tire sizes for the 2017–2020 Arctic Cat Havoc / Stampede.
What fits
The numbers for your Havoc / Stampede.
Can-Am and Honda call this 4x136 or 4x137 — same wheel. Check the stud thread: X3/Talon are M12x1.5, Defender/Commander/Sport/Trail are M10x1.25.
Conical seats centre the wheel on the studs.
Check it yourself
Measure before you order.
Center of one stud to the center of the stud opposite: 136 mm. Neighbouring studs on a 4x156 hub sit about 110 mm apart, which is how 4x156 machines get ordered as 4x110.
Use the lug nut torque figure in your owner’s manual.
Two inches over stock on a belt-driven car usually wants a clutch kit; sand paddles add rotating mass on top.
What Packard builds for it
6 forged styles in 4x136/137.
15x7 fronts and 15x11 rears, forged centers with beadlock or standard-lip barrels. The machine decides the pattern; you decide the rest.

See the Element →
See the Wishbone →
See the Apollo →
See the Cyclone →
See the V2 Super Star →All 4x136/137 wheels →Wheels filtered to your Havoc / Stampede →
Tires and parts
Finish the set.
Sand tires
Packard sand tires are built for 15-inch wheels. Steers up front, paddles in the rear.
All sand tires →Same wheels fit
Machines that share 4x136/137.
Same pattern, so the same Packard wheel. The stud thread can still differ, so check it on each page.
Questions
Havoc / Stampede fitment questions.
What bolt pattern does the Arctic Cat Havoc / Stampede use?
The 2017–2020 Arctic Cat Havoc / Stampede uses a 4x136/137 bolt pattern. Can-Am and Honda call this 4x136 or 4x137 — same wheel. Check the stud thread: X3/Talon are M12x1.5, Defender/Commander/Sport/Trail are M10x1.25.
Is the Arctic Cat Havoc / Stampede hub-centric or lug-centric?
Lug-centric. Conical lug seats centre the wheel on the studs.
What size Packard wheels and tires fit the Arctic Cat Havoc / Stampede?
Packard builds 15x7 fronts and 15x11 rears for it.
What other machines share wheels with the Arctic Cat Havoc / Stampede?
The same 4x136/137 pattern is on the Can-Am Maverick X3, Can-Am Maverick Sport / Trail, Can-Am Maverick 1000R, Can-Am Commander, Can-Am Defender, Can-Am Defender HD11, Honda Talon 1000, Honda Pioneer 1000. Check the stud thread before you swap lug nuts between them.