Skip to content
Fitment · Segway

Super Villain SX20
wheels & tires.

Bolt pattern, studs and the 15-inch Packard wheel and tire sizes for the 2025–2026 Segway Super Villain SX20.

5x4.5 (5x114.3)Bolt pattern
Lug-centricCentring
2025–2026Model years covered

What fits

The numbers for your Super Villain SX20.

Bolt pattern5x4.5 (5x114.3)

Polaris Pro R / Turbo R / Pro S / Xpedition / Ranger XD 1500 run M12x1.5 studs. CFMOTO Z10 / U10 Pro are 5x4.5 on M12x1.25 — same wheel, different lug nuts.

CentringLug-centric

Conical seats centre the wheel on the studs.

Factory wheels · tires15" beadlock · 32x10-15 all four

Check it yourself

Measure before you order.

5x4.5 (5x114.3) · 5 studs on a 114.3 mm (4.5 in) circle
Five studs, none straight across.

Measure from the center of one stud to the outer edge of the stud two over. On this hub that reads about 114.3 mm (4.5 in).

Torque to the book.

Use the lug nut torque figure in your owner’s manual.

Taller tires cost acceleration.

Two inches over stock on a belt-driven car usually wants a clutch kit; sand paddles add rotating mass on top.

What Packard builds for it

6 forged styles in 5x4.5 (5x114.3).

15x7 fronts and 15x11 rears, forged centers with beadlock or standard-lip barrels. The machine decides the pattern; you decide the rest.

ElementSee the Element →ApolloSee the Apollo →CycloneSee the Cyclone →V2 Super StarSee the V2 Super Star →ImpactSee the Impact →Pro 5See the Pro 5 →

All 5x4.5 (5x114.3) wheels →Wheels filtered to your Super Villain SX20 →

Tires and parts

Finish the set.

Sand tires

Packard sand tires are built for 15-inch wheels. Steers up front, paddles in the rear.

All sand tires →
Parts for the Super Villain SX20Everything in the catalog that fits this machine.Places to rideDune destinations by elevation.

Same wheels fit

Machines that share 5x4.5 (5x114.3).

Same pattern, so the same Packard wheel. The stud thread can still differ, so check it on each page.

Polaris RZR Pro RPolaris RZR Turbo RPolaris RZR Pro SPolaris XpeditionPolaris Ranger XD 1500CFMOTO ZFORCE Z10CFMOTO UFORCE U10 ProAll machines →

Questions

Super Villain SX20 fitment questions.

What bolt pattern does the Segway Super Villain SX20 use?

The 2025–2026 Segway Super Villain SX20 uses a 5x4.5 (5x114.3) bolt pattern. Polaris Pro R / Turbo R / Pro S / Xpedition / Ranger XD 1500 run M12x1.5 studs. CFMOTO Z10 / U10 Pro are 5x4.5 on M12x1.25 — same wheel, different lug nuts.

Is the Segway Super Villain SX20 hub-centric or lug-centric?

Lug-centric. Conical lug seats centre the wheel on the studs.

What size Packard wheels and tires fit the Segway Super Villain SX20?

Packard builds 15x7 fronts and 15x11 rears for it. Factory equipment is 15" beadlock · 32x10-15 all four.

What other machines share wheels with the Segway Super Villain SX20?

The same 5x4.5 (5x114.3) pattern is on the Polaris RZR Pro R, Polaris RZR Turbo R, Polaris RZR Pro S, Polaris Xpedition, Polaris Ranger XD 1500, CFMOTO ZFORCE Z10, CFMOTO UFORCE U10 Pro. Check the stud thread before you swap lug nuts between them.