Skip to content
Fitment · Polaris

RZR 900 / S 900 / S 1000
wheels & tires.

Bolt pattern, studs and the 15-inch Packard wheel and tire sizes for the 2015–2021 Polaris RZR 900 / S 900 / S 1000.

4x156Bolt pattern
M12x1.5Stud thread
2015–2021Model years covered

What fits

The numbers for your RZR 900 / S 900 / S 1000.

Bolt pattern4x156

Measure across the diagonal: neighbouring studs on a 4x156 hub are about 110 mm apart.

Stud threadM12x1.5

Lug nuts must match the pitch. The wrong one starts on the stud, then binds.

CentringLug-centric

Conical seats centre the wheel; the bore only needs to clear the 131 mm hub.

Check it yourself

Measure before you order.

4x156 · 4 studs on a 156 mm circle
Measure across the diagonal.

Center of one stud to the center of the stud opposite: 156 mm. Neighbouring studs on a 4x156 hub sit about 110 mm apart, which is how 4x156 machines get ordered as 4x110.

Match the thread, not just the pattern.

M12x1.5 here. The wrong pitch starts on the stud and then binds.

Torque to the book.

Use the lug nut torque figure in your owner’s manual.

Taller tires cost acceleration.

Two inches over stock on a belt-driven car usually wants a clutch kit; sand paddles add rotating mass on top.

What Packard builds for it

4 forged styles in 4x156.

15x7 fronts and 15x11 rears, forged centers with beadlock or standard-lip barrels. The machine decides the pattern; you decide the rest.

All 4x156 wheels →Wheels filtered to your RZR 900 / S 900 / S 1000 →

Tires and parts

Finish the set.

Questions

RZR 900 / S 900 / S 1000 fitment questions.

What bolt pattern does the Polaris RZR 900 / S 900 / S 1000 use?

The 2015–2021 Polaris RZR 900 / S 900 / S 1000 uses a 4x156 bolt pattern. Measure across the diagonal: neighbouring studs on a 4x156 hub are about 110 mm apart.

What lug nut thread does the Polaris RZR 900 / S 900 / S 1000 use?

M12x1.5 studs. Use lug nuts with that pitch. A nut with the wrong pitch starts on the stud and then binds.

Is the Polaris RZR 900 / S 900 / S 1000 hub-centric or lug-centric?

Lug-centric. Conical lug seats centre the wheel on the studs; the bore only needs to clear the 131 mm hub.

What size Packard wheels and tires fit the Polaris RZR 900 / S 900 / S 1000?

Packard builds 15x7 fronts and 15x11 rears for it.

What other machines share wheels with the Polaris RZR 900 / S 900 / S 1000?

The same 4x156 pattern is on the Polaris RZR Pro XP, Polaris RZR XP 1000 / XP Turbo, Polaris RZR Turbo S, Polaris RZR Trail / Trail S, Polaris RZR RS1, Polaris RZR XP 900, Polaris RZR 800 / S 800, Polaris RZR 570. Check the stud thread before you swap lug nuts between them.