Skip to content
Fitment · Kawasaki

Kawasaki Teryx KRX 1000
wheels & tires.

Bolt pattern, studs and the 15-inch sizes Packard builds for the 2020–2026 Kawasaki Teryx KRX 1000 — from the shop in Clearfield that machines the wheels.

Build a set for itWheels that fit
What fits
Bolt pattern4x156Measure across the diagonal: neighbouring studs on a 4x156 hub are about 110 mm apart.
Stud threadM12x1.25Lug nuts must match the pitch — the wrong one starts on the stud, then binds.
CentringLug-centricConical seats centre the wheel on the studs.
Factory wheels · tires15x8 beadlock 6.5+1.5 · 31x10-15
Packard 15-inch sizes commonly run32–33Fronts 15x7 · rears 15x11. Diameters are what owners run.

M12x1.25 studs — Polaris lug nuts (M12x1.5) start and then bind.

What Packard builds for it

4 forged styles in 4x156.

15x7 fronts and 15x11 rears, forged centers with beadlock or standard-lip barrels, in every finish. Same bolt pattern, same lug-hole spacing — the machine decides the pattern, you decide the rest.

ElementApolloV2Wishbone
Open the wheel builder
Before you order
  • Measure across the diagonal. On a 4-lug hub, neighbouring studs on a 4x156 hub sit about 110 mm apart — that is how 4x156 machines get ordered as 4x110.
  • Match the stud thread, not just the pattern. M12x1.25 here; the wrong pitch starts and then binds.
  • Torque lug nuts to the figure in your owner's manual.
  • Taller tires cost acceleration. Two inches over stock on a belt-driven car usually wants a clutch kit; sand paddles add rotating mass on top.
Same wheels fit
Polaris RZR Pro XPPolaris RZR XP 1000 / XP TurboPolaris RZR Turbo SPolaris RZR Trail / Trail SPolaris General / General XPPolaris Ranger XP 1000Yamaha YXZ 1000RYamaha Wolverine RMAXArctic Cat Wildcat XX

Pick the style. Pick the finish.
See the price.

Build a set for itAll FF Forged wheels