Skip to content
Fitment · Can-Am

Can-Am Maverick R
wheels & tires.

Bolt pattern, studs and the 15-inch sizes Packard builds for the 2024–2026 Can-Am Maverick R — from the shop in Clearfield that machines the wheels.

Build a set for itWheels that fitMaverick R page
What fits
Bolt pattern6x139.7 (6x5.5)Maverick R only — hub-centric, 78.1 mm bore.
Stud threadM12x1.5Lug nuts must match the pitch — the wrong one starts on the stud, then binds.
CentringHub-centric · 78.1 mm boreThe wheel bore has to match the hub, not just clear it.
Factory wheels · tires15" +58 · 30x10-15 (X RS: 16" beadlock · 32x10.5-16)
Packard 15-inch sizes commonly run32–35Fronts 15x7 · rears 15x11. Diameters are what owners run.

Hub-centric: the wheel bore has to be 78.1 mm, not just clear the hub.

What Packard builds for it

7 forged styles in 6x139.7 (6x5.5).

15x7 fronts and 15x11 rears, forged centers with beadlock or standard-lip barrels, in every finish. Same bolt pattern, same lug-hole spacing — the machine decides the pattern, you decide the rest.

ElementApolloCycloneV2SSImpactXImport
Open the wheel builder
Before you order
  • Measure across the diagonal. On a 4-lug hub, neighbouring studs on a 4x156 hub sit about 110 mm apart — that is how 4x156 machines get ordered as 4x110.
  • Match the stud thread, not just the pattern. M12x1.5 here; the wrong pitch starts and then binds.
  • Torque lug nuts to the figure in your owner's manual.
  • Taller tires cost acceleration. Two inches over stock on a belt-driven car usually wants a clutch kit; sand paddles add rotating mass on top.

Pick the style. Pick the finish.
See the price.

Build a set for itAll FF Forged wheels